42,00 €
inkl. MwSt. zzgl. Versandkosten
46 vorrätig
Lieferung zwischen 07.01.2025 und 10.01.2025
All these functions can be performed by our multi-function key.
This handmade key features three different end finishes, each performing one of the functions defined above.
For example, one end design is ideal for breaking off 4 mm – joint clips.
On the basis of the following picture the above mentioned functions of the key can be seen:
(a) Height adjustment
(b) Fixation
(c) Removing joint tabs
The multi-function key is mainly used to adjust the height of the ‚Professional‘ pedestal.
Especially in the case of not yet completely laid panels, this provides important assistance.
At the same time, hold the pedestal at the bottom and adjust the height of the pedestal using the key.
In the case of slabs that have already been completely laid, subsequent height adjustment is in principle only possible with the 4mm joint design of the pedestal.
At the outermost edge of a terrace construction made of self-levelling pedestals, pedestal with a fixed head should always be installed.
The following picture shows the effect of small edge plates when the pedestal at the edge are not designed as a fixed head.
In order to convert the pedestal ‚Professional from a self-leveling pedestal to a pedestal with a fixed head, the inner green fixing ring must be tightened. This is exactly what is done with the multi-function key.
It is often necessary to cut off joint tabs.
The multi-function key is very helpful here, especially for 4 mm joints!
Bewertungen
Es gibt noch keine Bewertungen.